Welcome to Spring Aqua!

WET 3 Calibration

Since there are at least 8 filters, It may take some time to “break in” or “prime” the filters. The water is safe to drink right away in both sides after the initial post installation flush.

Single handle water:

You may experience a slight mineral after taste (fishy)

You may see white bubbles

You may see spluttering

LONG FLUSH: We recommend running the water for 25 minutes every morning (or if you can 3x a day) for the first 5 days.

SHORT FLUSH: During the day, when you are using the water, we recommend running it 60-90 seconds to allow all the air bubbles to come out before filling a glass of water to drink.

The more frequent you repeat the LONG and SHORT FLUSH, the faster the system will calibrate. The spluttering and after taste will eventually go away. The taste will improve throughout the process

Once the spluttering stops and the slight mineral after taste (fishy) is gone, you can use the water like normal without flushing.

Depending on frequency on how often one decides to flush, it may take a few days or up to two weeks to have the system fully calibrated.

WET 3 water is clean, structured, remineralized, naturally alkaline 9.0-9.5pH and hydrogen water.

Applicational use: cooking, coffee, tea, soaking salads, and drinking water.

Important Information

Double check to make sure there are no leaks in the machine by taking a flash light and lifting up the side panels to shine inside to see. This will be a good thing to do periodically during the first 2 weeks of the filter use while the water system is naturally pressurizing. Doing a good inspection is the best prevention.

The faucet is 316L medical grade stainless steel. It may have a slight drip. It is not a leak. The water is highly structured. So may cause a slight drip.

For any other additional questions contact: customerservice@springaqua.com, bill@springaqua.com

Or call/text(206) 618-3668